- 24/7 Water Damage Emergency
- Licensed and Insured
- FREE Estimates
- Direct Insurance Billing
- Insurance Claims
Let’s start with the basics. Fire damage restoration service is the process of returning fire and smoke-damaged property to its pre-loss condition. In Los Angeles the length of the fire damage restoration procedure might range from a few weeks to several months, depending on the size of the fire and the damage it produced.
In addition to debris removal, odor and soot removal, cleaning, and deodorization, fire restoration can also involve demolition, and complete rebuilding of the property.
Also, it’s important to note that water damage often follows fire damage. After firefighters hose down the flames, property is likely to experience water damage as well.
Now that we’ve covered what fire restoration is, let’s take a closer look at each step in the fire restoration process and its importance.
The damage caused by fire is of many types. Here are some of the common types of damages caused by fire
| Type of Damage | Impact |
| Structural Damage | Destruction or weakening of the building’s structure, potentially rendering it unsafe for occupancy. |
| Water Damage | Water used to extinguish the fire can lead to damage to floors, walls, and other surfaces, as well as potential mold growth. |
| Heat Damage | High temperatures can cause materials to melt, warp, or otherwise deform, potentially rendering them unusable. |
It’s important to note that the impact of fire damage can vary widely depending on the severity of the fire, the materials involved, and other factors.
Our fire damage restoration process includes some major steps below:
Only once the area is deemed safe to enter will our experts assess the damage. This usually involves examining the structure and establishing how far the flames and smoke have penetrated. Here, we will also estimate how extensive and long the cleanup will be.
After evaluation, we will carry out any emergency repairs to ensure safety during restoration and reconstruction. This includes boarding up, fencing, or sealing portions of the roof to protect the property from further damage.
Next, we’ll review the property to assess what content can be saved. If the cost to restore damaged items is less than the cost to replace them, our team will carefully remove these items.
After removing them from the property, we will clean, disinfect and restore them. We can store them at our storage facility until your property is ready for you to move in again. If your business has been damaged, we also provide business client services to recover damaged records or documents.
As mentioned above, water damage follows fire damage. The next step is to remove excess water and dry the affected areas. It is vital to clean the water as soon as possible because the longer it sits the more damage it can do to the structure and contents.
In addition, it can also increase the chances of mold formation. After our team removes standing water, we will perform drying and dehumidification services to prevent secondary damage.
When it comes to sections of the property that are beyond repair, our team will undergo a controlled demolition. Damaged drywall, floors, ceilings, and other materials will be demolished and later removed.
These damaged areas can often get in the way of the restoration process. So once these structures have been fully removed, the team can begin to rebuild.
Did you know that soot is acidic to building materials and contents within your property? Then, any harmful byproducts of the fire must be professionally cleaned up and disposed of safely.
If a pipe has burst during the fire, it may be sewage or grey water that can contain a large number of bacteria and viruses. At Water Damage Restoration Pro, our team is well versed in cleaning up and decontaminating affected areas after a fire.
We can provide full rebuild services and take care of all necessary repairs. This option allows for a single point of contact from start to finish of your restoration process, without dealing with a handful of different contractors.
If necessary, we will bring in contractors for areas that require specific expertise, but we will continue to manage the entire process from start to finish.
| Step | Cost Range | Time Frame |
| Damage Assessment | $250-$500 | 1-2 hours |
| Removal of Items | $500-$2,500 | 1-2 days |
| Water Extraction and Drying | $1,500-$10,000 | 3-5 days |
| Controlled Demolition | $2,000-$15,000 per room | 1-2 weeks per room |
| Cleaning and Decontamination | $1,000-$5,000 per room | 2-5 days per room |
| Reconstruction and Repairs | $10,000-$100,000+ per room | 2-4 weeks per room |
Note that these are just approximate ranges and can vary depending on the extent of the damage, the location, and other factors. It’s always a good idea to get a professional assessment and estimate for your specific situation.
Fire can be scary; there is no doubt about it. And fire damage falls into the “worst kind” of property damage category. This is because it involves damage from flames, smoke, and the water used to put out the fire.
Prevention is, of course, essential. This means well-maintained smoke detectors and charged batteries. Create a routine for yourself whereby you check your fire detection system and batteries regularly. You won’t regret the extra effort you put in.
Unfortunately, fires still happen even in the safest and best-prepared properties. So make sure you have an escape plan in place for your family or employees.
You’ll need a plan for every room in the house or office, and your family and staff should be able to respond immediately, no matter where they are in the building.
Once you know your property is safe to enter:
It is always best to contact a professional fire damage restoration company right away as they can help you get your property back.
Even small fires can cause major problems due to damaged furniture and other belongings, the soot that remains, and water intrusion left over from firefighting efforts.
Here are some facts to consider when it comes to fire damage restoration:
Fire damage can affect the structural integrity of your home or office. So be very careful when entering the property before professionals tell you it’s safe to enter.
Fire can quickly cause serious damage to your property. Also, just a few hours after a fire finishes on wooden furniture can be ruined, metals can rust, and clothing could be permanently discolored.
And the walls and floors are likely to get damaged too, from peeling and discolored paint to warped floors and drywall. The longer you wait to act, the more expensive and challenging the restoration will be.
Contacting the experts right away may seem unnecessary, but we can help limit further problems as you deal with the fire damage restoration process.
It is certainly not easy to restore fabrics. This includes clothing, rugs, and other materials. An expert cleaner can help with more difficult items, especially rugs, and delicate clothing.
Once the odor has been removed, it will still take several wash cycles to get your clothes and carpet clean.
As you can see, fixing and cleaning up after a fire involves more than just cleaning the affected areas. Find a company that provides all the tools and options you need to return your property to its original state and get your fire damage restoration and smoke cleanup done.
We at Water Damage Restoration Pro take care of the entire restoration process beyond what meets the eye.
We understand how traumatic a fire can be. We are dedicated to providing you with dependability, and quality workmanship, during this very stressful time.
If your property is facing a fire, call us and we can send a team to your home or office facility. To learn more about our fire restoration process or other property restoration services, visit our website today.
After the fire fighting guys have doused the fire, the first priority is to ensure that your family members and pets are safe. Thereafter, you can call a fire damage restoration specialist like us to fully restore the gutted place.
It depends on the extent of the fire damage and to how many rooms & compartments in the house the fire has engulfed or spread. When we work on a project, we ensure for a speedy completion, taking a few days to a week.
Yes, we can assist you with navigating the claims process with your insurance company. Our team will help you document the damage, provide an estimate for restoration work, and communicate with your insurance company about the coverage and payment process.
We also have experience working with insurance companies and can provide guidance on what to expect during the claims process. Get help to understand your policy coverage and what expenses are eligible for reimbursement.
Visit our fire damage insurance page to know more.
We will establish clear lines of communication with you, including phone, email, or in-person meetings. Our team would be responsive to your inquiries and address any concerns you may have in a timely manner.
Here are some of the things that we will provide to maintain transparency: